Use these products to clean and protect glass surfaces:

CF 300 Glass Osmo Gloss
CF 430 Glass Wash
CF 450 Glass Formula
CF 462 Glass Calc Remover
CF 490 Glass Surface Protection
CF 500 Glass Degreaser

Glass Osmo Gloss is a surface tension reducing agent, which ensures faster drying time and leaves surfaces steak-free and shiny. This product improves surface tension, particularly in cold and extreme weather conditions and leaves a good water film. CF 300 Glass Osmo Gloss comes with a special measuring cap for adding 20 ml. of product to 600 liters of pure (reverse osmosis) water. Glass Osmo Gloss does not harm rubbers or other surfaces when used according to directions. This high-tech and very economical solution works quickly, dries fast, and leaves surfaces streak-free and shiny.

Glass Wash is a professional concentrated cleaner for cleaning glass with a washer and squeegee. Glass Wash cleans noticeably better than other products; leaves surfaces streak-free clean with no soapy film (unlike many detergents); produces the perfect amount of suds; stays wet longer, even on sunny and windy days; turns blue upon dilution; and contains no phosphates, ammonia, or other dangerous ingredients. Furthermore, Glass Wash is also gentle on hands. For normal jobs, dilute 1:500 or 2 ml. of product per liter of water or 20 ml. of product per 10 liters of water.  Reverse osmosis water is recommended. For heavy jobs, dilute 4ml. of product per liter of water, or 40 ml. of product per 10 liters of water.  A special measuring bottle for CF 300 Glass Wash is available for even more economical use.

Glass Formula is a fast-acting concentrated glass cleaner for removing stubborn dirt on glass like insects and bird feces. This product is designed to clean glass with pure (reverse osmosis) water brush wash systems. Glass Formula contains a special alcohol additive, which removes heavy dirt faster when used with reverse osmosis water, making this product a high-tech and streak-free solution to the problem of dirt. Glass Formula also has a mild fragrance, ideal suds level, and a fluorine yellow color for indicating its application at a glance. Use on all types of glass, as well as coated and synthetic sheeting. Use 1 liter of Glass formula per 50-100 liters pure (reverse osmosis) water. For stubborn dirt, apply and allow solution to soak in for several minutes.  For best results, rinse well with pure (reverse osmosis) water.

Glass Calc Remover is a powerful, concentrated glass and façade cleaner in a citric acid base. It is also ideal for use with the brush method and pure (reverse osmosis) water. Glass Calc Remover gets rid of lime, cement scum, rust, and more. It is especially suited for deep cleaning and degreasing existing glass (for example, as a pre-cleaner before applying CF 490 Glass Surface Protection). Use on flat glass and insulating glass. (Do not use on glass with a solar coating in positions 1 and 4.) A pre-test must be performed before using this product. For heavy jobs, use in conjunction with a white nylon pad until dirt disappears; do not allow solution to dry on the surface to which it is applied.   For best results, rinse well immediately with pure (reverse osmosis) water after using Glass Calc Remover. For normal jobs, use 1 liter CF 490 to 100 liters pure (reverse osmosis) water.  For heavy jobs, dilute 1:50 (1 liter product to 50 liters water).

Glass Surface Protection / Clear Shield is a finishing product for almost all glass types, including float and insulating glass, mirrors, and etched or sandblasted glass. This product forms a protective layer between the glass surface and direct contact with cement and iron oxides, making cleaning glass less labor intensive. Areas treated with Glass Surface Protection are less affected by environmental and other pollutants due to the molecular tension on the glass structure. When using on existing glass, first deep clean and degrease the surface, then neutralize. Apply Glass Surface Protection full strength and evenly using a spray system with a sprayer, pressure tank, or roller. Leave product on for 10 minutes. Wipe off using a soft cotton cloth until spots completely disappear and/or rinse thoroughly with pure (reverse osmosis) water. Follow directions for optimum application so that the application flows smoothly in five steps. Glass Surface Protection reduces maintenance costs and time by cutting down the number of washings needed per year. The perfect glass surface finish makes glass last longer. This product makes heavily damaged glass like new, without the cost of replacement.

Glass Degreaser is a very concentrated super degreaser for mineral greases. This product is especially suited for use on glass coated with mineral greases. Works well on façades, glass, and plating. Glass Degreaser is also perfect for removing impregnating agents on surfaces such as glass walls and may be used on float and insulating glass. Apply Glass Degreaser with a sponge, pad, or brush wash system diluted 1 liter per 30-100 liters pure (reverse osmosis) water. For stubborn dirt, allow the cleaning solution to soak in for several minutes.  Do not let the solution dry, and rinse well with pure (reverse osmosis) water. Guaranteed results, very economical to use.